EN
Error Codes –
45
1
6L, 5L, 6P, 5P, 4P, 4L
• A temporary error has occurred.
– Power cycle the printer.
• The laser scanner assembly is not seated.
• The laser scanner assembly is defective.
– Replace the laser scanner assembly (or cable on the 5L only).
• The DC controller PCA is defective (5L, 5Si only).
LJ 5, 4Plus, 4
• The laser scanner cable connectors are faulty.
• The laser scanner assembly is defective.
4V
• There is a problem with the fiber optic cable.
• The laser scanner assembly is defective.
4Si, IIISi
• The toner cartridge is defective.
• There is a problem with the fiber optic cable.
• The connectors are faulty.
– Reseat the connectors J002 on the DC controller and the J601
on the laser drive PCA.
• The DC voltage is poor.
– Verify that the 12 VDC is present on the J601-2 of the laser drive
PCA.
• The laser scanner assembly is defective.
51 Error (loss of beam detect)
To Next Page
Loading...
Need help?
General
