46 – Control panel messages
EN
IIIP, IIP Plus, IIP
• The toner cartridge is improperly seated.
• The laser shutter operation is functioning improperly.
• The fiber optic cable is damaged.
• The laser PCA is bad.
IIID, III, IID, II
• The toner cartridge is defective.
• There is a bad cable in the laser scanner to the DC controller.
– Replace the cable in the laser scanner to the DC controller
(RG1-0908-000CN).
• The fiber optic cable has cuts or kinks.
• The laser scanner assembly is defective.
2686D/A
• The laser or laser power setting is defective.
• The scanner is defective.
5Si
• Laser subsystem problem.
If x=1: Beam detect malfunction.
If x=2: Laser malfunction.
– Press [Select] to resume operation. If error persists:
Check the cable from the DC controller to the laser scanner.
Replace the laser scanner assembly.
Replace the DC Controller PCA.
51.x Error