50 – Control panel messages
EN
6L/5L
• An error has been found in the RAM or ROM.
– Power cycle the printer.
• The memory card is defective or incompatible.
– Turn off the printer, remove any additional memory, then turn the
printer back on. If the message clears, replace the memory card.
• The formatter PCA is defective.
5Si, 6P, 5P, 5, 4V, 4P, 4Plus, 4, 4Si
• A SIMM malfunction has occurred.
– Verify that the SIMM board is installed correctly. Replace the
SIMM that caused the error.
53.XY.ZZ Error
To Next Page
Loading...
Need help?
General
