EN
Error Codes –
63
1
5Si
• The field replacement units (FRUs) are not installed properly.
– Reinstall the FRUs.
LJ 5
• The formatter PCA is defective.
– Reseat any accessories. If the error persists, replace the
formatter PCA.
4V
• A temporary error has occurred.
– Power cycle the printer.
• The paper guide and plate assembly are defective.
4P, 4Plus, 4, IIIP, IIID, III, IIP Plus, IIP, IID, II, 2686D/A
• The formatter PCA is defective.
– Reseat any accessories. If the error persists, replace the
formatter PCA.
4Si
• A temporary error has occurred.
– Power cycle the printer.
• The paper guide and plate assembly are defective.
4V, 4Si, IIISi
• The SIMMs are defective.
67 Service/Printer Error
67 Memory