Label Explanation
Risk of burns. Do not touch the
curing zone and the output platen of
the printer. It could be hot.
Located in front of the curing module. For user.
Risk of trapping fingers.
Do not touch gears while moving.
Danger for your hands, they may
become trapped between
gearwheels.
Located o
n rear sides of substrate path, one on the substrate input gear and one on the
Take-up reel gear (only for HP Latex 370, 360 & 330).
For user.
Moving part.
Keep away from moving printhead
carriage. When printing, the
printhead carriage travels back and
forth across the substrate.
Located on rear side of the scan axis window, behind the plastic. For user.
You are recommended to wear
gloves when handling maintenance
cartridge and ink collector or
removable print zone installation.
Located on maintenance cartridge. For user.
Electric shock hazard.
Heating modules operate at
hazardous voltages. Disconnect all
power sources before servicing.
Located on the curing control PCA enclosure. For service personnel only.
ENWW Warning labels 5
To Next Page
Loading...
Need help?
General
