To Next Page

To Previous Page

4. Pivot the monitor clockwise from landscape to portrait orientation viewing to adapt to your

application.

Figure 3-10 Pivoting the Monitor

NOTE: To view information on the screen in portrait mode, you will need to install the Pivot Pro

software included on the software and documentation CD. The position of the OSD menu can also

be rotated to portrait mode. To rotate the OSD menu, press the Menu button on the monitor's front

panel, then select OSD Control > OSD Rotation.

Turning on the Monitor

1. Press the power switch to turn on the computer.

2. Verify the master power switch on the rear of the monitor is in the on (I) position.

3. Press the power button on the front of the monitor.

CAUTION: Burn-in image damage may occur on monitors that display the same static image on

screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you

should always activate a screen saver application or turn off the monitor when it is not in use for a

prolonged period of time. Image retention is a condition that may occur on all LCD screens.

* A prolonged period of time is 12 consecutive hours of non-use.

NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled.

To disable this feature, press and hold the monitor power button for 10 seconds.

Turning on the Monitor 15

Other manuals for HP LP2275w

Questions and Answers:

Need help?

Do you have a question about the HP LP2275w and is the answer not in the manual?

General

3D	No
Panel type	PVA
Pixel pitch	0.282 x 0.282 mm
Response time	6 ms
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Display technology	LCD
Vertical scan range	48 - 85 Hz
Horizontal scan range	30 - 93 kHz
Contrast ratio (typical)	1000:1
Display number of colors	-
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1280 x 1024 (SXGA), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Storage temperature (T-T)	20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Non-operating relative humidity (non-condensing)	5 - 90 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	85 W
Power consumption (standby)	2 W
Power consumption (typical)	56 W
Plug and Play	Yes
Tilt angle range	-5 - 30 °
Height adjustment	100 mm
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	4
Product color	Black
Country of origin	China
Dimensions (W x D x H) (imperial)	19.9 x 10 x 18.8 \
Package weight	11300 g

Weight and Dimensions