Device Settings
Gain access to the product's Device Settings by following these steps.
1. Windows Vista and Windows 7: Click Start, click Control Panel, and then in the category for
Hardware and Sound click Printer.
-or-
Windows XP, Windows Server 2003, and Windows Server 2008 (using the default Start menu
view): Click Start, and then click Printers and Faxes.
-or-
Windows XP, Windows Server 2003, and Windows Server 2008 (using the Classic Start menu
view): Click Start, click Settings, and then click Printers.
2. Right-click the driver icon, and then select Properties.
3. Click the Device Settings tab.
Figure 4-13 Device Settings tab - M1212nf model shown
The following settings can be configured on the Device Settings tab.
●
Duplex Mode
●
Jam Recovery
●
Status Messages
146 Chapter 4 HP host based print driver for Windows ENWW
To Next Page
Loading...