●
Cleaning Page
●
Print Density
●
Auto-Off Console
NOTE: Click the Apply button on the Device Settings tab to apply any changed settings.
Duplex Mode
Use the Duplex Mode section to set duplex settings.
●
M1130/M1210 series products have the option to Allow Manual Duplexing. Allow Manual
Duplexing is selected by default.
Jam Recovery
When the Jam Recovery feature is turned on, the product reprints any pages that are damaged during
a jam. The default setting for Jam Recovery is Off.
Status Messages
When the Status Messages feature is turned on, status messages related to the operation of the product
appear. The default, and recommended, setting for Status Messages is On.
ENWW Device Settings 147
To Next Page
Loading...