Page 3 of 11 white paper
Figure 2 Digital Signature Not Found dialog box
This dialog appears only in Windows 2000, Windows XP, and Windows 2003
Server, and only when drivers are being installed directly on the machine (not when
they are being installed as a Point and Print client).
3. Open a configuration file and modify it to meet your requirements. A configuration
file can be a .CFG or a .CFM file. The .CFG file is the standard configuration file
that is part of the driver installation package.
The .CFM file is a special file that can be used to configure a driver without
triggering the WHQL Digital Signature warning during driver installation. The .CFM
file is not a part of the driver and cannot be installed as a part of a standard
network installation.
For information on deploying a .CFM file, see Copying a .CFM file to the driver
directory.
The UI consists of two tabs: Device Settings and Printing Preferences.
Device Settings tab
The settings in the Device Settings tab, illustrated in Figure 3, are related to the
installed hardware on the device. Certain features on the Printing Preferences
tab rely on the installation of various hardware accessories in order to be used.
To Next Page
Loading...
