6. Make sure that both sides of the assembly are secured by the blue hooks.
7. Lower the roller assembly, and then close the ADF cover.
NOTE If jams continue in the ADF, contact a local HP-authorized service provider. See
HP Customer Care.
8. Plug in the device, and then turn on the device.
Clean the paper path
1. From the Home screen, touch Administration.
2. Touch Print Quality.
3. Touch Calibration/Cleaning.
4. Touch Create Cleaning Page.
The device prints a cleaning page.
5. Follow the instructions printed on the cleaning page.
ENWW Clean the device 143
To Next Page
Loading...
