Access plate
1. Remove the following components:
●
Left-side cover (see
Left-side cover on page 97)
●
Back cover (see
Back cover on page 101)
●
I/O cover (see
I/O cover on page 103)
●
Duplexer inlet guide (see
Figure 5-61 Removing the fuser (1 of 3) on page 139)
2. At the front of the device, push the green button on the top, right front of the tray 2 opening to
release the access plate.
Figure 5-66 Removing the access plate (1 of 2)
144 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...