8
Note:
1. The speed cam alert function must have the speed cam map datum of the country or region built into the GPS
of the device. If there is no built-in map datum, this function will not work. If GPS is not installed, this function
has no effect either. The speed cam alert function is for reference only, and it’s not guaranteed to cover all
speed cam spots on the driving route. Please make own judgments based on actual road conditions while
driving.
2. The speed cam map datum depending on shipping area. Please contact distributor whether if it’s built-in or not
for your area.
1.4 Getting Started
1.4.1 Insert the Memory Card
Insert memory card with the gold pins facing forward, and the nameplate of the host is
toward up, see the picture as below,
1.4.2 Remove the Memory Card
Turn off the scooter’s engine, and the camera will power off accordingly. Once the camera is
completely powered off, you can remove the memory card from memory slot.
Note:
1. Don’t remove or insert the memory card while the camera is in working status. This may damage the memory
card or cause data lose.
2. Support microSD card speed V30 or higher and capacity 16GB or greater. (support up to 128GB)
3. Please use Go Moto Plus app to format the memory card and sync the date and time before the initial use.
4. Please regularly format memory card and sync date/time. (Recommend once a month)
To Next Page
Loading...
Need help?
General
