HP ML150 - Page 8

NOTE:
NOTE: NOTE:
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
SAS/SATA Models
SAS/SATA ModelsSAS/SATA Models
SAS/SATA Models
HP ML150G3 E5310 HP-
HP ML150G3 E5310 HP-HP ML150G3 E5310 HP-
HP ML150G3 E5310 HP-
SAS/SATA, 1GB
SAS/SATA, 1GBSAS/SATA, 1GB
SAS/SATA, 1GB
438786-xx1
HP ML150G3 5130 HP-
HP ML150G3 5130 HP-HP ML150G3 5130 HP-
HP ML150G3 5130 HP-
SAS/SATA,1GB
SAS/SATA,1GBSAS/SATA,1GB
SAS/SATA,1GB
416773-xx1
Processor(s)
Processor(s)Processor(s)
Processor(s)
One of the following
depending on Model
(1)Quad-Core Intel® Xeon® processor E5310 (1.60 GHz, 1066 FSB, 80W)
(1)Dual-Core Intel® Xeon® processor 5050 (3.00 GHz, 667 FSB, 130W)
(1)Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB, 80W)
Cache Memory
Cache MemoryCache Memory
Cache Memory
One of the following
depending on Model
Integrated 2x2MB L 2 cache (5000 sequence)
Integrated 4MB L 2 cache (5100 sequence)
Integrated 2x4MB L2 cache (5300 sequence)
Memory
MemoryMemory
Memory 1 GB PC2-5300 Fully Buffered DIMMs (DDR2-667)
Network Controller
Network ControllerNetwork Controller
Network Controller Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL
Storage Controller
Storage ControllerStorage Controller
Storage Controller HP 8 Internal Port SAS Host Bus Adapter with RAID
Hard Drive
Hard DriveHard Drive
Hard Drive None ship standard
Internal Storage
Internal StorageInternal Storage
Internal Storage
One of the following
depending on Model
1.8TB (6 x 300GB) SAS
4.5TB (6 x 750GB) SATA (With standard/optional SAS controllers and 6
optional HDD)
Optical Drive
Optical DriveOptical Drive
Optical Drive 48x CD-ROM
Form Factor
Form FactorForm Factor
Form Factor Tower standard; 5U Rack via optional rack mounting kit
SATA Models
SATA ModelsSATA Models
SATA Models
HP ML150G3 5110
HP ML150G3 5110HP ML150G3 5110
HP ML150G3 5110
NHP-SATA,512MB
NHP-SATA,512MBNHP-SATA,512MB
NHP-SATA,512MB
416769-xx1
HP ML150G3 5110 HP-
HP ML150G3 5110 HP-HP ML150G3 5110 HP-
HP ML150G3 5110 HP-
SATA,512MB
SATA,512MBSATA,512MB
SATA,512MB
416768-xx1
HP ML150G3 5120 HP-
HP ML150G3 5120 HP-HP ML150G3 5120 HP-
HP ML150G3 5120 HP-
SATA,512MB
SATA,512MBSATA,512MB
SATA,512MB
416770-xx1
HP ML150G3 5130 HP-
HP ML150G3 5130 HP-HP ML150G3 5130 HP-
HP ML150G3 5130 HP-
SATA,512MB
SATA,512MBSATA,512MB
SATA,512MB
416772-xx1
Processor(s)
Processor(s)Processor(s)
Processor(s)
One of the following
depending on Model
(1)Dual-Core Intel® Xeon® processor 5050 (3.00 GHz, 667 FSB, 130W)
(1)Dual-Core Intel® Xeon® processor 5110 (1.6 GHz, 1066 FSB,65W)
(1)Dual-Core Intel® Xeon® processor 5120 (1.86 GHz, 1066 FSB, 65W)
(1)Dual-Core Intel® Xeon® processor 5130 (2.0 GHz, 1333 FSB, 65W)
Cache Memory
Cache MemoryCache Memory
Cache Memory Integrated 2x2MB L2 cache (5000 sequence)
Integrated 4MB L2 cache (5100 sequence)
Integrated 2x4MB L2 cache (5300 sequence)
Memory
MemoryMemory
Memory 512 MB PC2-5300 Fully Buffered DIMMs (DDR2-667)
Network Controller
Network ControllerNetwork Controller
Network Controller Embedded HP NC7781 Gigabit Server Adapter 10/100/1000 WOL
Storage Controller
Storage ControllerStorage Controller
Storage Controller HP Embedded SATA RAID Controller
Hard Drive
Hard DriveHard Drive
Hard Drive None ship standard
Internal Storage
Internal StorageInternal Storage
Internal Storage 4.5TB (6 x 750GB) SATA (With standard SATA controller and 6 optional
HDD)
Optical Drive
Optical DriveOptical Drive
Optical Drive 48x CD-ROM
Form Factor
Form FactorForm Factor
Form Factor Tower standard; 5U Rack via optional rack mounting kit
NOTE:
NOTE: NOTE:
NOTE: In BIOS revisions prior to 11/03/2006, the default configuration for SATA models will not recognize when more than four
drives are installed while running Microsoft Windows operating system. To recognize all six drives, AHCI mode has to be enabled
and SATA AHCI driver installed. For further information on how to enable AHCI mode, please refer to the RTF card that is shipped
with the server or posted on http://www.hp.com .
NOTE:
NOTE: NOTE:
NOTE: When configuring RAID using the embedded SATA RAID controller, two arrays have to be set up to recognize all six drives.
NOTE:
NOTE: NOTE:
NOTE: Only hot plug drives are supported on the ML150 G3; these hot plug drives, when installed on Non-hot plug models, will
not have hot plug functionality.
NOTE:
NOTE: NOTE:
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional
QuickSpecs
HP ProLiant ML150 Generation 3 (G3)
HP ProLiant ML150 Generation 3 (G3)HP ProLiant ML150 Generation 3 (G3)
HP ProLiant ML150 Generation 3 (G3)
Models
DA - 12527 Worldwide — Version 26 — March 28, 2008 Page 8