HP ML310 - ProLiant - G2 - Server Fault Indications Flowchart

98 HP ProLiant ML310 Generation 2 Server User Guide
Server Fault Indications Flowchart
Symptoms:
• Server boots, but a fault event is reported by Insight Management Agents (on
page 70
)
•
•
•
•
•
Server boots, but the internal health LED is red or amber
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer to
1 "Management Agents (on page 70)"
2 • "Integrated Management Log (on page 73)"
• "Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support
).
3 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
4 System Management Homepage
(http://h18013.www1.hp.com/products/servers/management/ag
ents/index.html)
5 "Power-On Problems ("Power-On Problems Flowchart" on page
90
)"
6 • "Hard Drive Problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support
).
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 "HP Insight Diagnostics (on page 73)"