Removal and replacement procedures 63
7. Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution.
8. Install the heatsink.
9. Close the heatsink locking levers.
IMPORTANT: Install all components with the same configuration that was used on the failed
system board.
10. Install all components removed from the failed system board.
11. Connect the cables to the system board.
12. Install the access panel.
13. Do one of the following:
o Install and lock the bezel.
o Slide the server back into the rack.
14. Power up the server.
To Next Page
Loading...
