Removal and Replacement Procedures
Extending the Server from the Rack
To extend the server from the rack:
1. Loosen the thumbscrews that secure the front bezel to the front of the rack (1).
2. Extend the server on the sliding rack rails until the spring-load rail lock engages (2).
Figure 2-1: Extending the server from the rack
WARNING: To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the server into or out of the rack. The sliding rails could
pinch your fingertips.
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide 2-5
To Next Page
Loading...
