Removal and Replacement Procedures
Figure 2-46: Securing the processor retaining bracket lever.
CAUTION: Before closing the processor retaining bracket, be sure that the processor locking
lever is closed. Forcing the bracket shut may damage the processor or the processor socket.
NOTE: When replacing a failed processor, run the ROM-Based Setup Utility (RBSU) after replacing the
new processor to mark the failed processor as repaired. Refer to the HP ProLiant ML370 Generation 3
Server Setup and Installation Guide or the HP ROM-Based Setup Utility User Guide for more detailed
information on RBSU.
2-48 HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide
To Next Page
Loading...
