HP ML370 - ProLiant - G3 - Page 78

Diagnostic Tools
Table 3-1: Diagnostic Tools continued
Tool Description How to run the tool
SmartStart Software SmartStart software is the intelligent
way to set up the server. The
SmartStart CD includes the
ROMPaq Utility, driver updates, and
assistance installing operating
systems.
Use the information provided in the
ProLiant Essentials Foundation
Pack.
Survey Utility Survey Utility gathers critical
hardware and software information
on servers running Microsoft
Windows NT or Novell NetWare.
If a significant change occurs
between data-gathering intervals,
the Survey Utility marks the previous
information and overwrites the
survey text files to reflect the latest
changes in the configuration.
Install the Survey Utility from the
SmartStart CD, the Integration
Maintenance Utility, or the
Management CD.
Integrated Management Log (IML) The IML is a log of system events
such as system failures or nonfatal
error conditions. View events in the
IML from within:
• Insight Manager 7
• Survey Utility
• Operating system-specific IML
utilities
The IML requires operating system-
dependent drivers. Refer to the
SmartStart CD for instructions on
installing the appropriate drivers.
ROM-Based Setup Utility (RBSU) RBSU configures the hardware
installed in or connected to the
server. Specifically, it can:
• Configure ports and IRQ, if
required
• Manage memory installation,
processor upgrades, and mass
storage devices
• Store configuration information
in nonvolatile memory
• Assist in installing an operating
system
Run RBSU by pressing the F9 key
during POST.
continued
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide 3-3