The MSM320-R is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g product. The
Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The MSM320-R is
certified under the SpectraLink Voice Interoperability for Enterprise Wireless (VIEW)
Certification Program when it operates in autonomous mode or in controlled mode in
conjunction with an MSM7xx Controller.
MSM320-R Access Point Quickstart
This Quickstart shows you how to get started using the MSM320-R Access Point (US J9365A/B, WW J9368A/B).
After reading this Quickstart, you can visit www.hp.com/go/procurve/manuals and download documents of particular interest such as the MSM3xx / MSM4xx
Access Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide.
Hardware overview
Package contents
MSM320-R featuring a die-cast aluminum enclosure with three-point silicone gasket, two
2.4 GHz (5.5 dBi) 802.11b/g omnidirectional antennas, weatherproof quick-disconnect
RJ-45 Ethernet connector, wall-mount bracket, pole-mount bracket assembly, grounding lug,
two antenna adapters (only to be used with optional external antennas), documentation.
Radios and antennas
The MSM320-R has two radios with one antenna each. The antenna connectors are
weatherproof straight-polarity N-type female bulkhead antenna connectors. Optional external
antennas are available from HP ProCurve. On the HP ProCurve Website, see the Accessories
section for the MSM320-R.
To Next Page
Need help?
General
