HP MSM430 User Manual

In
The MSM430, MSM460, and MSM466 are Wi-Fi Alliance
authorized Wi-Fi CERTIFIED 802.11n/a/b/g products. The Wi-Fi
CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
MSM430, MSM460, and MSM466 802.11n Access Points Quickstart
This Quickstart shows you how to install and get started using the MSM430, MSM460, and MSM466 Dual Radio 802.11n Access Points, hereafter referred to as
the AP except for when referencing a specific model. The latest HP documentation is available at www.hp.com/support/manuals.
Important: Operating this AP in controlled mode requires HP MSM7xx software V5.5.2 or later.
Hardware overview
➀
➁
➅
➇➈
➆
➆
➆
➆
➃
➄
➃
➂
Front view
1: Status LEDs (left to right) Power, Ethernet, Radio 1, Radio 2
2: Cable lock hole
3: Retention screw hole
Back view
4: Antenna connectors (MSM466 only)
Radio 1 right, Radio 2 left
5: Reset button
6: Cable channel
7: AP Bracket tab slot
8: Console port
9: Ethernet port
Model Part numbers
MSM430 J9651A (WW), J9650A (AM), J9652A (JP), J9653A (IL), J9654A (TAA)
MSM460 J9591A (WW), J9590A (AM), J9589A (JP), J9618A (IL), J9655A (TAA)
MSM466 J9622A (WW), J9621A (AM), J9620A (JP), J9619A (IL), J9656A (TAA)
WW=Worldwide, AM=The Americas, JP=Japan, IL=Israel, TAA=AM special.

HP MSM430 Specifications

General

Wireless Standards	IEEE 802.11a/b/g/n
Frequency Band	2.4 GHz, 5 GHz
Power over Ethernet (PoE)	Yes
Maximum Data Rate	300 Mbps
Data Transfer Rate (maximum)	300 Mbps
Networking Standards	IEEE 802.11a/b/g/n
Antenna Gain Level (max)	3 dBi
Power Consumption (max)	12.95 W
Antennas	Internal
Frequency Band Range	2.4 GHz, 5 GHz
Security Algorithms	WPA, WPA2
Input Voltage	48 V
Operating Temperature (T-T)	0 - 40 °C
Operating Relative Humidity (H-H)	5% to 95%
Security Features	WPA, WPA2, WEP, 802.1X
Management	SNMP
Ethernet Ports	1 x 10/100/1000
Number of Users	128