HP MSM430 Installation Guide

HP MSM430, MSM460, MSM466 802.11n
AP Installation Guide
Abstract
This document describes how to install and initially configure the HP MSM430, MSM460, and MSM466 802.11n Access
Points (hereafter referred to as the AP). Professional wireless and electrical equipment experience is required. The main
configuration information for autonomous mode is found in the MSM3xx / MSM4xx APs Configuration Guide. The main
configuration information for controlled mode is found in the MSM7xx Controllers Configuration Guide.
HP Part
Number: 5998-3781
Published: March 2013
Edition: 1

HP MSM430 Specifications

General

Wireless Standards	IEEE 802.11a/b/g/n
Frequency Band	2.4 GHz, 5 GHz
Power over Ethernet (PoE)	Yes
Maximum Data Rate	300 Mbps
Data Transfer Rate (maximum)	300 Mbps
Networking Standards	IEEE 802.11a/b/g/n
Antenna Gain Level (max)	3 dBi
Power Consumption (max)	12.95 W
Antennas	Internal
Frequency Band Range	2.4 GHz, 5 GHz
Security Algorithms	WPA, WPA2
Input Voltage	48 V
Operating Temperature (T-T)	0 - 40 °C
Operating Relative Humidity (H-H)	5% to 95%
Security Features	WPA, WPA2, WEP, 802.1X
Management	SNMP
Ethernet Ports	1 x 10/100/1000
Number of Users	128