HP MultiSeat ms6000 User Manual

8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1)
and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure 5-43 Replacing the Thermal Sensor
9. Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the
cover in place (2).
Figure 5-44 Replacing the Carrier Cover
10. Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.
NOTE: The carrier must be locked for power to be supplied to the hard drive.
66 Chapter 5 Removal and Replacement Procedures

HP MultiSeat ms6000 Specifications

General

Brand	HP
Model	MultiSeat ms6000
Category	Server
Language	English