Need help?Do you have a question about the HP MicroServer and is the answer not in the manual?
Procedures for safely shutting down the server, including warnings and important notes.
Instructions on how to safely access the server's interior by opening the panel door.
Guidelines for selecting a suitable server operating location based on environmental standards.
Details electrical regulations and guidelines for safe server installation and operation.
Process for installing supported operating systems on the server.
Crucial precautions and methods to prevent static damage to components during installation.
Step-by-step instructions for installing and removing memory modules (DIMMs).
Information on installing and enabling the Trusted Platform Module (TPM) for security.
Introduction to the system's embedded configuration utility (RBSU) for managing settings.
Tool for performing hardware diagnostics and verifying system operation.
Steps to configure the embedded SATA RAID feature for data storage.
Critical safety guidelines and warnings to follow during troubleshooting procedures.
The initial flowchart to guide users through the troubleshooting process.
General section for diagnosing and resolving issues related to server hardware components.
Specific troubleshooting steps for issues related to server power supply and sources.
Troubleshooting issues specific to the server's operating system.
Procedures for updating and maintaining system and option firmware versions.
FCC regulations regarding radio frequency emissions and device classifications.
EU directives and CE marking compliance information for the product.
Essential precautions and best practices to avoid static damage to components.
Various methods for proper grounding of electrostatic-sensitive parts.
Contact details for HP technical support and authorized resellers.
Essential information to gather before contacting HP support for assistance.
Information on HP's Customer Self Repair program for replacing parts.
To Next Page
General