Hardware options installation 19
The DIMM slots are structured to ensure proper installation. If you insert a memory module but it
does not fit easily into the slot, you may have inserted it incorrectly. Reverse the orientation of the
module and insert it again.
5. Perform the post-installation procedure.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 20).
2. Retaining the recovery key/password (on page 21).
3. Enabling the Trusted Platform Module (on page 21).
TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows®
BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website
(http://www.microsoft.com
).
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
• Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
• When installing or replacing hardware, HP service providers cannot enable the TPM or the
encryption technology. For security reasons, only the customer can enable these features.
To Next Page
Loading...
Need help?
General