3. Load envelopes according to the graphic in the tray.
NOTE: Do not load envelopes while the printer is printing.
4. Adjust the width guide so it fits snugly against the sides of the envelope.
Load cards and photo paper
To load cards and photo paper
Use these instructions to load photo paper.
1. Lift the input tray.
2. Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-sized media, pull the input tray to extend it.
3. Insert the media print-side up and align it squarely against the paper guide. If the
photo paper has a tab along one edge, make sure the tab is pointing up.
NOTE: Do not load paper while the printer is printing.
4. Adjust the paper width guide so it fits snugly against the sides of the paper.
Chapter 1
16 Get started
To Next Page
Loading...
