Set up wireless (802.11) communication (some models only) 15
English
Windows
1. Save any open documents. Close any applications that
are running on your computer.
2. Place the HP software CD into the computer.
Step 2: Install software for your printer
Follow the instructions for your operating system.
3. Select Network (Ethernet/Wireless), and then follow
the onscreen instructions.
Note: If the rewall software on your computer
displays any messages during the installation, select
the “always permit/allow” option in the messages.
Selecting this option allows the software to install
successfully on your computer.
Mac OS
1. Place the HP software CD into the computer. 2. Double-click the HP Installer icon on the software CD,
and then follow the onscreen instructions.
Step 3: Test the wireless connection
Print the wireless test page for information about the
printer’s wireless connection. The wireless test page
provides information about the printer’s status, MAC
address, and IP address. If the printer is connected to a
network, the test page displays details about the network
settings.
1. Touch right arrow , and then touch Network.
2. Touch Wireless, and then touch Wireless Network Test.
To Next Page
Loading...
