Set up wireless (802.11) communication (some models only)16
Change the connection method
If you have installed the HP software and connected your
printer using a USB, Ethernet, or wireless connection, you
can change to a different connection any time you want.
Note: If you are changing to a wireless connection,
make sure that an Ethernet cable is not connected to
the printer. Connecting an Ethernet cable turns off the
printer’s wireless capabilities.
Follow the instructions for your operating system.
Windows
1. On the computer desktop, click Start, select Programs
or All Programs, click HP, select your printer name,
and then click Connect a New Printer.
2. Follow the onscreen instructions.
Mac OS X
1. Click the HP Utility icon in the Dock.
Note: If the icon does not appear in the Dock, click
the Spotlight icon on the right side of the menu bar,
type HPUtility in the box, and then click the
HP Utility entry.
2. Click the Application icon on the toolbar.
3. Double-click HP Setup Assistant, and then follow the
onscreen instructions.
To Next Page
Loading...
