HP OMEN 880 - Page 8

EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure31 Uninstall the front bezel hook and remove bezel
part from chassis
Figure32 Remove the front cover voodoo lighting from
bezel cover by 4 PCS screws to uninstall
Figure33 Remove the trim lighting module from the bezel
cover
Figure34 Remove the plastic foots from chassis bottom
Figure35 Remove the gasket from the chassis rear inside
Figure36 Remove the plastic lock screw and remove it