WARNING! Please read “Additional Safety Information” in the Limited Warranty and Support
Guide before installing and connecting your system to the electrical power system.
Preparing to remove the computer stand
To avoid injury and equipment damage when opening the computer, always complete the following
steps in order:
1. Remove any media and external devices (such as any CD, DVD, memory cards, USB devices, or
external hard disk drives) from the computer.
CAUTION: Static electricity can damage the electronic components of the computer or optional
equipment.
2. Ensure that you are discharged of static electricity by briefly touching a grounded metal object.
3. Click the Windows Start button and then select Shut Down.
WARNING! To reduce the risk of personal injury from electrical shock or hot surfaces,
disconnect the power cord from the wall outlet, and allow the internal system components to cool
before touching them.
4. After the system has completely shut down, disconnect the power adapter from the back of the
computer.
5. Disconnect all other attached cables from the back and side of the computer.
Removing the computer stand
To mount the all-in-one computer to the wall, you must remove the computer stand.
2 Chapter 1 Preparing the computer for wall-mounting
To Next Page
Loading...
Need help?
General
