DC controller
1. Remove the front cover. See Front Cover on page 40.
2. Remove the control panel. See
Control panel on page 40.
3. Remove the left side cover. See
Side Covers on page 41.
4. Remove the fuser. See
Fuser on page 47.
5. Remove three screws from the metal plate (callout 1). Remove the metal plate.
Figure 4-22 Remove DC controller (1 of 4)
6. Remove the black plastic crossmember (callout 2) by lifting up on the left tab.
Figure 4-23 Remove DC controller (2 of 4)
54 Chapter 4 Removal and replacement ENWW
To Next Page
Loading...