3. On the Configure tab, click the drop-down menu, select the printer model, and then click OK.
Figure 3-1 Configure the driver
Plug-and-play installation for direct USB connection in Microsoft Windows 98 SE
Up to five events might occur when you use Microsoft Windows Plug-and-Play to install the
HP LaserJet P2015 print driver software on a computer running Microsoft Windows 98 SE.
NOTE: The SETUP.EXE program on the HP LaserJet P2015 printing-system CD is not supported in
Windows 98 SE, Windows Me, or Windows Server 2003. For these operating systems, use Microsoft
Plug-and-Play for direct USB connections or the add-printer-wizard installation for network connections
to install the print drivers. If you run SETUP.EXE in these operating systems, an error message
appears: The operating system on this computer is not supported.
Follow these steps to install the HP LaserJet P2015 printing-system software on a computer running
Microsoft Windows 98 SE.
1. Verify that the HP LaserJet P2015 printer is turned on.
2. Quit all open programs.
ENWW Installation options 85
MS Windows install
To Next Page
Loading...