Tray 2 solenoid
1. Remove the following components:
●
All covers (see
Covers on page 69)
●
Formatter (see
Formatter on page 80)
●
ECU (see
Engine control unit (ECU) on page 88)
●
High-voltage power supply (see
High-voltage power supply on page 97)
●
Gear assembly (see
Gear assembly on page 108)
2. Remove one screw (callout 1).
1
Figure 5-45 Removing the tray 2 solenoid
3. Lift the solenoid off of the device chassis.
112 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...