571044-001 — Removing and Replacing the Memory Card Reader 5
12 Pull the reader partway out through the front of the
computer.
13 Turn over the reader, press the latch in the center of
the plug (1), and then pull the plug (2) from the
connector.
Replacing the Memory Card
Reader
1 Connect the cable to the back of the reader.
2 Insert the reader into the computer.
IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
To Next Page
Loading...
