To Next PageTo Next Page
Need help?Do you have a question about the HP P6300 Enterprise Virtual Array and is the answer not in the manual?
General| Brand | HP |
|---|---|
| Model | P6300 Enterprise Virtual Array |
| Category | Network Storage Server |
| Language | English |
Requirements for installing and using the storage system, including network and hardware.
Key considerations for designing the EVA storage layout, capacity, and performance.
Best practices for setting up a high-performance IP storage network for optimal operation.
Factors affecting network speed and recommendations to minimize latency.
HP's Vraid implementation and their characteristics for data redundancy and performance.
Ensuring the rack and floor can safely support the equipment's weight and stability.
Guidelines for airflow and access around the equipment for proper operation.
Ensuring reliable and uninterrupted power supply to the storage system.
Steps for safely unpacking the storage system components upon arrival.
Guidelines for safely and efficiently mounting equipment into a server rack.
Detailed steps for installing rack mounting rails for enclosures.
Procedures for mounting controller and disk enclosures into the rack.
Instructions for inserting disk drives into the enclosures in the correct sequence.
Recommendations for organized, reliable, and maintainable cable management.
Steps to physically connect controllers to disk enclosures for data transfer.
Steps to connect controllers to the SAN network for host access.
Procedure for safely connecting power to the storage system components.
Recommendations before powering up the storage system for the first time.
Checking controller LEDs to confirm proper operation after power-on.
Checking disk enclosure LEDs for operational status after power-on.
Steps to install necessary drivers for Fibre Channel connectivity.
Setting up network connectivity and IP addresses for management ports.
Process of finding and adding storage devices within the Command View interface.
Assigning IP addresses to iSCSI data ports for network communication.
Procedure to update the operating software for the iSCSI/FCoE modules.
How to reboot the management modules for maintenance or troubleshooting.
Steps to establish management connectivity via a public network.
Steps to establish management connectivity via a private network.
Modifying port settings for direct server connections instead of fabric mode.
Using SmartStart to set up management servers for array configuration.
Using SmartStart to configure application servers (hosts) for storage access.
Basic steps for utilizing and checking the status of the installed storage.
Information on how to contact HP for technical assistance and troubleshooting.
Safety guidelines to prevent rack tipping and ensure equipment stability.
Where to find crucial identification details for service and support.
Detailed cabling instructions for connecting P6300 EVA controllers to disk enclosures.
Detailed cabling instructions for connecting P6500 EVA controllers to disk enclosures.
Cabling instructions for Fibre Channel connections between EVA and network devices.
Cabling instructions for iSCSI/FCoE connections to servers and switches.
