4 Power settings
This section explains standby, hibernation, and shutdown procedures.
Turning the computer or display on or off
Task Procedure Result
Turn on the computer. Press the power button.
●
The power lights are turned
on.
●
The operating system loads.
Shut down the computer.* 1. Save your work and close all open applications.
2. Shut down the computer through the operating
system by selecting Start > Turn Off Computer
> Turn Off.*
●
The power lights are turned
off.
●
The operating system shuts
down.
●
The computer is turned off.
Turn off the display while the
power is on.
Close the computer. Closing the computer activates the
display switch, which initiates
standby.
*If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer.
ENWW Turning the computer or display on or off 9
To Next Page
Loading...
