HP PAVILION G6

2 External component identification
Right side
Component Description
(1) Optical drive (select models only) Reads and writes to an optical disc.
(2) Optical drive light
●
Green or Amber: The optical drive is being accessed.
●
Off: The optical drive is idle.
(3) Optical drive eject button Releases the disc tray.
(4)
Power light
●
White: The computer is on.
●
Blinking white: The computer is in the Sleep/Suspend
state, which is an energy-saving mode. The computer
shuts off power to the display and other unneeded
components.
●
Off: The computer is off or in Hibernation. Hibernation
is an energy-saving mode that uses the least amount of
power.
(5)
Hard drive light
●
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
hard drive.
(6)
USB 2.0 port Connects an optional USB device.
(7) AC adapter light
●
White: The computer is connected to external power
and the battery is fully charged.
●
Blinking white: The battery has reached a low battery
level.
●
Amber: The computer is connected to external power
and the battery is charging.
●
Off: The computer is not connected to external power.
6 Chapter 2 External component identification ENWW