A2
A3
8 • HP All-in-One
b Follow the onscreen instructions. Complete the
Sign up now screen.
b Double-click the HP All-in-One installer icon.
c Make sure you complete all screens, including the
Setup Assistant.
Macintosh Users:Windows Users:
a Connect the USB cable from your computer to the
USB port on the back of the device.
a Follow the onscreen instructions until you see
the prompt to connect the USB cable. (This
may take several minutes.)
Once the prompt appears, connect the USB
cable to the port on the back of the
HP All-in-One, and then to any USB port on
your computer.
Go to the last page to make a test copy
Connect the USB cable
To Next Page
Loading...