3 • HP all-in-one
7
8
9
Connect the supplied phone cord
Connect one end of the supplied phone cord to the
phone port on the left (1-LINE) and the other to a wall
jack.
To connect an answering machine, see the Fax
Setup chapter in the User Guide. To use a
different phone cord, see the Troubleshooting
Information chapter in the User Guide.
Press the On button
a After you press the On button, the green light fl ashes, and then
becomes solid. This may take up to a minute.
b Wait for the print cartridge prompt before continuing.
On
Connect the power cord and adapter
USB cable users: Do NOT connect the USB
cable until this guide instructs you to or the software
may not install properly.
To Next Page
Loading...