HP Photosmart 2600

4 • HP all-in-one
10
11
12
Open access door
a Hold the tri-color print cartridge with the
HP label facing up.
b Place the tri-color print cartridge in front of
the left slot.
c Push the cartridge fi rmly into the slot until it
stops.
Insert the tri-color print cartridge
Make sure the device is ON before
continuing.
a Lift the access door.
b Press down and lift up the green
and black latches on the inside
of the HP all-in-one.
Remove tape from both cartridges
Pull the pink tab to remove the tape from both
print cartridges.
Do not touch the copper-
colored contacts or retape the
cartridges.