HP Photosmart 2710

Wireless connection without an access point (ad hoc)
An ad hoc network is a simple wireless connection without an access point. For
information, see Connect to a wireless network without an access point.
Wired connection (Ethernet)
The traditional wired network uses Ethernet cables to connect computers and devices
through a router or switch. An Ethernet network is fast, reliable, and secure. For
information, see Connect with an Ethernet cable.
Use the network management tools
For information on using the HP all-in-one management tools, see Manage your
network.
Switch from a USB connection to a network connection
If you first install your HP all-in-one with a USB connection, you can later switch to a
network connection.
To switch a USB connection to a network connection
1 Unplug the USB connection from the back of your HP all-in-one.
Chapter 1
4