ChapbI
Adjustthepaper-widthguideintheinputtraytofitsnuglyagainstallpaper.Makesure
thepaper-widthguidedoesnotbendthepaperintheinputtray.
Donotforcepapertoofarforwardintheinputtray.
UsepapertypesthatarerecommendedfortheHPAll-in-One.
R int dB ecfly onto a C©£}V/}
/, Use the software that came with the HP All-in-One to create and print a CD/DVD label.
2, When prompted, carefully remove the CD/DVD holder that came with the HP All-in-
One.
The CD/DVD holder is stored below the main input tray.
3, Securely snap the inkjet printable media onto the CD/DVD holder with the printable
side up. The CD/DVD should be placed on the ring at the end of the holder with the
arrows.
NOTE: If you are using a smaller-sized media, flip the CD/DVD holder ring over
the CDIDVD.
8 HPAI/ _O/,e<::vervew
To Next Page
Loading...