HP ProBook 450 G7 - Button, Speakers, and Fingerprint Sensor

Button, speakers, and ngerprint sensor
Table 2-6 Button, speakers, ngerprint sensor, and their descriptions
Component Description
(1) Power button ● When the computer is o, press the button to turn on the computer.
● When the computer is on, press the button briey to initiate Sleep.
● When the computer is in the Sleep state, press the button briey to exit Sleep
(select products only).
● When the computer is in Hibernation, press the button briey to exit
Hibernation.
IMPORTANT: Pressing and holding down the power button results in the loss of
unsaved information.
If the computer has stopped responding and shutdown procedures are ineective,
press and hold the power button for at least 5 seconds to turn o the computer.
To learn more about your power settings, see your power options.
▲ Right-click the Power meter icon and then select Power Options.
(2) Speakers (2) Produce sound.
(3) Vent Enables airow to cool internal components.
NOTE: The computer fan starts up automatically to cool internal components and
prevent overheating. It is normal for the internal fan to cycle on and o during
routine operation.
(4) Fingerprint sensor (select
products only)
Allows a ngerprint logon to Windows, instead of a password logon.
▲ Swipe down across the ngerprint reader.
IMPORTANT: To prevent ngerprint logon issues, make sure when you register
your ngerprint that all sides of your nger are registered by the ngerprint reader.
Keyboard area 13