Select To do this
NOTE: Availability of the options above varies by
computer model.
●
Enable/disable HP DayStarter (enabled by default).
●
Enable/disable HP QuickLook (enabled by default).
● Enable/disable Preboot Authentication on HP QuickLook
Boot (disabled by default).
●
Enable/disable Virtualization Technology (select models
only; disabled by default).
● Enable/disable HP QuickWeb (enabled by default).
●
Enable/disable HP QuickWeb write protect (disabled by
default).
●
Enable/disable Multi Core CPU (enabled by default).
● Enable/disable Intel® HT Technology (enabled by
default).
●
Enable/disable wake on USB (enabled by default).
● Enable/disable Unified Extensible Firmware Interface
(UEFI) mode (disabled by default).
● Turn the Numlock state at boot on or off.
Computer Setup in Windows 7 87
To Next Page
Loading...
