2-9
Installing the Switch
Installation Procedures
3. Mount the Switch
After the switch passes self test, it is ready to be mounted in a stable location.
The switch can be mounted in these ways:
■ on a horizontal surface
■ on a wall
■ under a table
■ rack or cabinet (1410-16G Switch and 1410-24G Switch only)
Rack or Cabinet Mounting
The 1410-16G Switch and 1410-24G Switch can be rack mounted using the
included brackets.
Note that the mounting brackets have multiple mounting holes and can be
rotated allowing for a wide variety of mounting options. Secure the rack in
accordance with the manufacture’s safety guidelines.
WARNING For safe operation, please read the mounting precautions on
page 2-3, before mounting a switch.
Equipment
Cabinet
Note
The 12-24 screws supplied with the switch are the correct threading for
standard EIA/TIA open 19-inch racks. If installing the switch in an equipment
cabinet such as a server cabinet, use the clips and screws that came with the
cabinet in place of the 12-24 screws that are supplied with the switch.
To Next Page
Loading...
