HP ProCurve 3400cl-24G User Manual

Router Redundancy Using XRRP
Messages Related to XRRP Operation
Message Meaning
No local IP addr < IP-address-in-hex > from
rtr < router-num >, on < vid-num >.
Rtr < router-num >, has < ip-address-count >
IP addrs on vid < vid-num />,local rtr
has < ip-address-count >
Rcvd a pkt from rtr < router-num > on vid
< vid-num > with the wrong password
Rcvd pkt from rtr < router-num > on vid
< vid-num > with a msmtchd ad int
No VR instances for the local rtr
< router-num >
No VR instances for the remote rtr
< router-num >
Rtr < router-num > has taken < primary/
secondary > IP address control
Rtr < router-num > has relinquished
< primary/secondary > IP address control
Indicates that XRRP received a packet with an IP
address that doesn't match any of the configured IP
addresses on the associated virtual router. This error
will force the remote miss-configuration flag to be set
so fail-over will only occur when a complete router
failure occurs. (Indicates a configuration error.)
Indicates that XRRP received a packet with an IP
address count that doesn't match the local
configuration. This error will not force the remote
miss-configuration flag to be set so fail-over can still
occur. (Indicates a configuration error.)
This indicates that XRRP received a packet with an
authentication error. This error will not force the
remote miss-configuration flag to be set so fail-over
can still occur. (Indicates a configuration error.)
Indicates that XRRP received a packet with a
mismatched advertisement interval. This error will not
force the remote miss-configuration flag to be set so
fail-over can still occur. (Indicates a configuration
error.)
Indicates that XRRP does not have the local router
configured with any virtual router instances. No Fail-
over on this router is possible. (Indicates a
configuration error.)
Indicates that XRRP does not have the remote (non-
owner) router configured with any virtual router
instances. This error will not force the remote miss-
configuration flag to be set however this router has
no information on how to fail-over for the remote
router. (Indicates a configuration error.)
This informational message indicates that XRRP has
taken control of either the primary or secondary
address.
This informational message indicates that XRRP has
taken released control of either the primary or
secondary address.
12-24

HP ProCurve 3400cl-24G Specifications

General

Brand	HP
Model	ProCurve 3400cl-24G
Category	Switch
Language	English