HP ProCurve 3400cl-24G

Stack Management for the Series 3400cl and 6400cl Switches
Configuring Stack Management
You will then see the Commander’s Stacking Status screen:
Figure 13-19. Example of the Commander’s Stacking Status Screen
Viewing Member Status. This procedure displays the Member’s stacking
information plus the Commander’s status, IP address, and MAC address.
To display the status for a Member:
1. Go to the console Main Menu of the Commander switch and select
9. Stacking ...
5. Stack Access
2. Use the downarrow key to select the Member switch whose status you
want to view, then press
[X] (for eXecute). You will then see the Main Menu
for the selected Member switch.
3. In the Member’s Main Menu screen, select
9. Stacking ...
1. Stacking Status (This Switch)
You will then see the Member’s Stacking Status screen:
13-26