6-30
Stack Management for the 3500, 3500yl, 6200yl and 6600 Switches
Configuring Stack Management
Viewing the Status of all Stack-Enabled Switches Discovered in the IP
Subnet. The next example lists all the stack-configured switches discovered
in the IP subnet. Because the switch on which the show stack all command
was executed is a candidate, it is included in the “Others” category.
Syntax: show stack all
Figure 6-24. Result of Using the Show Stack All Command To List Discovered Switches in the IP Subnet
Viewing the Status of the Commander and Current Members of the
Commander’s Stack. The next example lists all switches in the stack of the
selected switch.
Syntax: show stack view
Figure 6-25. Example of the Show Stack View Command To List the Stack Assigned to the Selected
Commander
HP Switch(config)# show stack all
Stacking - Stacking Status (All)
Stack Name MAC Address System Name Status
--------------- ------------- ------------------------- --------------------
Big_Waters 1cc1de-cfbc80 Big_Waters-0 Commander Up
000883-08f980 Big_Waters-1 Member Up
Others: 0060b0-889e00 DEFAULT_CONFIG Candidate
HP Switch(config)# show stack view
Stack Members
SN MAC Address System Name Device Type Status
-- ------------- ------------- -------------------- ------------
0 1cc1de-cfbc80 Big_Waters-0 HP Switch 3500yl Commander Up
1 000883-08f980 Big Waters-1 HP Switch 3500yl Member Up
To Next Page
Loading...
Need help?
General