Figure43 Loose 4 screws from the PSU PCA and remove it
Figure44 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it
Figure45 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it(Gamay
300W REG PSU-Bestec)
Figure46 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it(Gamay
300W APFC PSU-Chicony)
EL-MF877-00 Page 13
Template Revision B
PSG instructions for this template are available at EL-MF877-01
To Next Page
Loading...
