Figure47 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it(Gamay
300W REG PSU-Chicony)
Figure48 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it(Gamay
300W APFC PSU-Acbel)
Figure49 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it(Gamay
300W E*6 PSU-Bestec)
Figure50 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it(Gamay
300W E*6 PSU- Acbel))
EL-MF877-00 Page 14
Template Revision B
PSG instructions for this template are available at EL-MF877-01
To Next Page
Loading...
