EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure37 Heat the solder of Electrolytic Capacitors
greater than 2.5cm in diameter or height and remove it.
(C801 ,C951)(Crasto-S 180W E*6 PSU-Delta)
Figure38 Heat the solder of Electrolytic Capacitors
greater than 2.5cm in diameter or height and remove it.
(C801,C802,C951,C303) (Crasto-S 180W REG PSU-
Delta)
Figure39 Heat the solder of Electrolytic Capacitors
greater than 2.5cm in diameter or height and remove it.
( Crasto-S 180W APFC-Acbel)
Figure40 Heat the solder of Electrolytic Capacitors
greater than 2.5cm in diameter or height and remove it.
(Crasto-S 180W REG PSU-Chicony)
Figure41 Heat the solder of Electrolytic Capacitors
greater than 2.5cm in diameter or height and remove it.
(Crasto-S 180W APFC PSU-Chicony)
To Previous Page
Loading...
